DTC Troubleshooting

DTC Troubleshooting: P0602

DTC P0602: ECM Programming Error

NOTE:

- Before you troubleshoot, record all freeze data and any on-board snapshot, and review the general troubleshooting information. Reading and Clearing Diagnostic Trouble Codes

- This DTC is indicated when an ECM update is not completed.

- Do not turn the ignition switch to ACC (I) or LOCK (0) while updating the ECM. If you do, the ECM can be damaged.

1. Do the ECM update procedure. ECM/PCM Update

2. Check for Pending or Confirmed DTCs with the HDS.

Is DTC P0602 indicated?
YES - Replace the original ECM. Service and Repair

NO - Update is complete. If any other Pending or Confirmed DTCs are indicated, go to the indicated DTC's troubleshooting.