Manufacturer Code Charts: 2706

Navigation System DTC Troubleshooting: 2706

DTC 2706: Gyro Diag: ECU Temp xx °C

NOTE: Before you troubleshoot, make sure to follow the General Troubleshooting Information. Reading and Clearing Diagnostic Trouble Codes

1. Check that the dash temperature is between -4 °F (-20 °C) and 158 °F (70 °C).

2. Clear the hard error code. Reading and Clearing Diagnostic Trouble Codes

3. Turn the ignition switch to LOCK (0), and then back to ON (II).

4. Check for the hard error code. Reading and Clearing Diagnostic Trouble Codes

Is DTC 2706 indicated?
YES - Replace the audio-navigation unit. Audio-Navigation Unit Removal/Installation (With Navigation)

NO - Intermittent failure, the system is OK at this time. If the vehicle repeatedly comes back with the DTC, replace the audio-navigation unit. Audio-Navigation Unit Removal/Installation (With Navigation)