Instrument Panel Removal/Installation

Instrument Panel Removal/Installation

Special Tools Required

- KTC trim tool set SOJATP2014*

NOTE:

- Take care not to scratch the dashboard and related parts.

- Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.

1. Remove these items:
- Subdisplay visor Subdisplay Visor Removal/Installation

- Navigation unit, with navigation system:
- '09 model. Service and Repair

- Audio unit, without navigation system:
- '09 model. Audio Unit Removal/Installation (Without Navigation, With Audio)

2. Remove the screws.






3. Detach the clips along the lower edge of the instrument panel (A).






4. Detach the clips along the upper edge of the instrument panel (A). Gently pull out the instrument panel to release the hooks (B) from the holder (C) of the gauge control module.

5. Install the instrument panel in the reverse order of removal, and note these items:
- If the clips are damaged or stress-whitened, replace them with new ones.

- Push the clips and the hooks into place securely.