Set Speed Does Not Resume When The Resume/Accel Button Is Pressed (Cancelled by Pressing Brake Pedal)

Set speed does not resume when the resume/accel button is pressed (with the cruise control main button pressed on, and set speed temporarily canceled by pressing the brake pedal)

Diagnostic Procedure:

1. Check for PGM-FI DTCs. Initial Inspection and Diagnostic Overview

2. Check the brake pedal position switch adjustment. Adjustments

3. Do the cruise control combination switch test. Cruise Control Combination Switch Test/Replacement

4. Do the cruise control input test. Cruise Control Input Test Test the cruise control resume/accel switch signal input. Test the brake pedal position switch signal input.

Also check for:

- Open circuit, loose or disconnected terminal: ORN
- Faulty brake pedal position switch