Manufacturer Code Charts: 2706

Navigation System DTC Troubleshooting: 2706

DTC 2706: ECU Temp XX °C

NOTE:

- Before you troubleshoot, make sure to follow the general troubleshooting information. How to Troubleshoot The Navigation System (With Navigation)

- Do this test only when the dash temperature is between -4 °F (-20 °C) and 158 °F (70 °C).

1. Clear the hard error code. How to Troubleshoot The Navigation System (With Navigation)

2. Turn the ignition switch to LOCK (0), and then back ON (II).

3. Check for the hard error code. How to Troubleshoot The Navigation System (With Navigation)

Is DTC 2706 indicated?
YES - Replace the navigation unit. Service and Repair

NO - Intermittent failure, the system is OK at this time.