DTC 66-12

DTC 66-11: Pressure Sensor (Inside of VSA Modulator-control Unit) Malfunction

DTC 66-12: Pressure Sensor (Inside of VSA Modulator-control Unit) Malfunction

DTC 66-13: Pressure Sensor (Inside of VSA Modulator-control Unit) Malfunction

DTC 66-14: Pressure Sensor (Inside of VSA Modulator-control Unit) Malfunction

DTC 66-16: Pressure Sensor (Inside of VSA Modulator-control Unit) Malfunction
1. Turn the ignition switch to ON (II).
2. Clear the DTC with the HDS.
3. Turn the ignition switch to LOCK (0), then turn it to ON (II) again.
4. Check for DTCs with the HDS.

Is DTC 66-11, 66-12, 66-13, 66-14, or 66-16 indicated?

YES - Replace the VSA modulator-control unit.

NO - Intermittent failure, the system is OK at this time.