DTC 34-01

DTC 34-01: Power Relay Stuck ON (Ignition Switch is OFF)

1. Turn the ignition switch to ON (II).
2. Clear the DTC with the HDS.
3. Turn the ignition switch to LOCK (0).
4. Turn the ignition switch to ON (II).

Does the EPS indicator come on?

YES - Go to step 5.

NO - Check for loose terminals or poor connections. If the connections are good, the system is OK at this time.

5. Check for DTCs with the HDS.

Is DTC 34-01 indicated?

YES - Check for loose terminals in the EPS control unit connectors, and repair if necessary. If no poor connections are found, replace the EPS control unit.

NO - Troubleshoot the indicated DTC. If there are no DTCs, the system is OK at this time.