B1905

DTC B1905: Immobilizer-Keyless Control Unit Lost Communication with MICU (DRLOCKSW Message)

NOTE: If you are troubleshooting multiple DTCs, be sure to follow the instructions in B-CAN System Diagnosis Test Mode A.

1. Clear the DTCs with the HDS.
2. Turn the ignition switch OFF, and then back ON (II).
3. Wait for 6 seconds or more.
4. Check for DTCs witch the HDS.

Is DTC B1905 indicated?

YES - Go to step 5.

NO - Intermittent failure, the system is OK at this time. Check for loose or poor connections at the immobilizer-keyless control unit 7P connector, and under-dash fuse/relay box connector Q (16P).

5. Check for DTCs with the HDS.

Is DTC B1160 also indicated with DTC B1905?

YES - Faulty MICU; replace the under-dash fuse/relay box.

NO - Replace the immobilizer-keyless control unit.