DTC 66-15

DTC 66-15: Pressure Sensor (inside of VSA Modulator-control Unit) Malfunction

1. Raise the vehicle, and support it with safety stands in the proper locations.
2. Turn all four wheels by hand.

Is there brake drag?

YES - Repair the brake drag.

NO - Go to step 3.

3. Check the PRESSURE SWITCH in the VSA DATA LIST with the HDS while moving the brake pedal.

Does the indicated value change?

YES - Intermittent failure, the system is OK at this time.

NO - Replace the VSA modulator-control unit.