DTC 34-01

DTC 34-01: Power Relay Stuck ON (ignition switch is OFF)
1. Clear the DTC: with the HDS.
2. Turn the ignition switch OFF.
3. Turn the ignition switch ON (II).
Does the EPS indicator come on?
YES - Go to step 4.
NO - Check for loose terminals or poor connections. If the connections are good, the system is OK at this time.

4. Check for DTCs with the HDS.
Is DTC 34-01 indicated?
YES - Check for loose terminals in the EPS control unit connectors, and repair if necessary. If no poor connections are found, replace the EPS control unit.
NO - Troubleshoot the indicated DTC. If there are no DTCs, the system is OK at this time.