Heated Mirror Switch: Service and Repair

Power Mirror Switch Test/Replacement

4-door

1. Remove the driver's door grip cover.




2. Disconnect the 13P connector from the power mirror switch (A).




3. Check for continuity between the terminals in each switch position according to the table.
4. If the continuity is not as specified, remove the screws and replace the switch.

2-door

1. Remove the driver's dashboard lower cover.




2. Disconnect the 13P connector from the power mirror switch (A).




3. Check for continuity between the terminals in each switch position according to the table.
4. If the continuity is not as specified, remove the screws and replace the power mirror switch.