Pinion Gear, M/T

M/T Differential Pinion Gear:
Backlash:
Standard or New 0.05 - 0.15 mm (0.002 - 0.006 inch)
Inside Diameter:
Standard or New 18.042 - 18.066 mm (0.7103 - 0.7113 inch)
Pinion Gear-To-Pinion Shaft Clearance:
Standard or New 0.059 - 0.095 mm (0.0023 - 0.0037 inch)
Service Limit 0.15 mm (0.006 inch)
80 mm Shim
80 mm shim-to-Bearing Outer Race Clearance In Transmission Housing:
Standard or New 0 - 0.10 mm (0 - 0.0039 inch)
Service Limit Adjust