Torque Specifications

Main Bearing Torque Sequence




Tighten the bearing cap bolts in sequence to 29 Nm (3.0 kgf-cm, 22 ft. lbs.).
Tighten the bearing cap bolts an additional 56°.




Tighten the 8 mm bolts in sequence to 22 Nm (2.2 kgf-cm, 16 ft. lbs.).


Connecting Rods




Point A-Point B = Difference in Diameter
Difference in Diameter:
Specification: 0 - 0.1 mm (0 - 0.004 inch)




Apply engine oil to the threads of the connecting rod bolts.
Tighten the connecting rod bolts to 20 Nm (2.0 kgf-cm, 14 ft. lbs.).
Tighten the connecting rod bolts an additional 90°.


Crankshaft Pulley







Crankshaft Pully Bolt to 245 Nm (25,0 kgf.m, 181 lbf.ft.)


Flywheel M/T




Install the special tool, then torque the flywheel mounting bolts in a crisscross pattern in several steps.


Oil Pump




Exploded View


Water Pump




The six bolts securing the water pump.