Seat Latch: Service and Repair
Rear Seat-back Latch Replacement1. Remove the seat-back.
2. Remove the seat-back cover.
3. Remove the seat-back pad (A) from the seat-back frame (B). On right seat-back with center shoulder belt, pass the center belt (C) through the hole in the seat-back pad.
4. Remove the bolts, then remove the seat-back latch (A) from the seat-back frame (B), and release the pivot pin (C) of the latch lever (D) from the seat-back frame.
5. Install the latch in the reverse order of removal, and make sure the seat-back locks and unlocks properly.