P0607

DTC P0607: Malfunction in ECM Internal Circuit (2004-2005 models)

NOTE:
- Information marked with an asterisk (*) applies to 2002-2003 models.
- Information marked with double asterisk (**) applies to 2004-2005 models.

1. Reset the ECM.
2. Turn the ignition switch ON (II), and wait for 40 seconds.

Is DTC P1607* (P0607)** indicated?

YES - Update the ECM if it does not have the latest software, or substitute a known-good ECM, then recheck. If the symptom/indication goes away with a known-good ECM, replace the original ECM.

NO - Intermittent failure, system is OK at this time. A low battery can cause this problem. Ask the customer if there has been any recent trouble starting the engine.