DTC 62

DTC 62: EPS Control Unit Internal Circuit (Fail-safe Relay Stuck ON)
1. Clear the DTC.
2. Start the engine.
Does the EPS indicator come on?
YES-Go to step 3.
NO-Check for loose wires or poor connections. If the connections are good, the system is OK at this time.
3. Stop the engine, and verify the DTC.
Is DTC 62 indicated?
YES-Check for loose or poor connections at the EPS control unit. If the connections are good, substitute a known-good EPS control unit. If the symptom/indication goes away, replace the original EPS control unit and recheck.
NO-Perform the appropriate troubleshooting for the code indicated.