Shift Fork, M/T
DIMENSIONSClearance Between Each Shift Fork And Its Matching Synchro Sleeve:
Standard 0.35 - 0.65 mm (0.014 - 0.026 inch)
Service Limit 1.0 mm (0.04 inch)
Thickness Of The Shift Fork Fingers Standard:
3rd/4th 7.4 - 7.6 mm (0.291 - 0.299 inch)
1st/2nd, 5th 6.2 - 6.4 mm (0.244 - 0.252 inch)
Clearance Between The Shift Piece Or Shift Fork And The Shift:
Standard 0.2 - 0.5 mm (0.008 - 0.02 inch)
Service Limit 0.62 mm (0.024 inch)
Groove Of The Shift Piece Or Shift Fork:
Standard 13.2 - 13.4 mm (0.520 - 0.528 inch)