Front Seat

CAUTION: Put on gloves to protect your hands.

NOTE: Take care not to tear the seams or damage the seat covers.

Seat-back cover removal:




1. Release the hook, and fold back the seat-back cover.
2. Release all inside springs, then fold back the seat- back cover.
3. Remove the headrest.




4. Remove the headrest guide, then remove the seat-back cover.
5. Installation is the reverse of the removal procedure.

NOTE: To prevent wrinkles when installing a seatback cover, make sure the material is stretched evenly over the pad before securing the inside springs and hook.

Seat cushion cover removal:

1. Remove the seat cushion.




2. Remove the clips from under the seat cushion, then loosen the seat cushion cover.




3. Pull back the edge of the seat cushion cover all the way around, then release the clips, and remove the seat cushion cover.




4. Installation is the reverse of the removal procedure.

NOTE:
- To prevent wrinkles when installing a seat cushion cover, make sure the material is stretched evenly over the pad before securing the clips.
- Replace the released clips with new ones.