Hood Latch Release Cable: Service and Repair

ALIGNMENT:
The hinges can be adjusted right and left as well as fore and aft by using the elongated holes.
- Turn the edge cushions as necessary, to make the hood fit flush with the body at front and side edges.
Adjust the hood latch to obtain the proper height at the forward edge.

NOTE:
- Before pulling out the opener cable, tie a string to the cable so you can pull it back in later.
- Take care not to bend the opener cable.
Installation is the reverse of the removal procedure.

NOTE:
- Make sure the opener cable is routed and connected properly.
- Adjust the hood alignment.