Ignition Switch: Service and Repair

1. On models equipped with radio coded theft protection system, refer to Vehicle Damage Warnings for system disarming and arming procedures. On models equipped with airbag system, refer to Technician Safety Information for system disarming and arming procedures.
2. Disconnect battery ground cable.
3. Remove steering column covers.
4. Disconnect ignition switch electrical connectors from dash fuse box and main wire harness.
5. Remove cover screw and cover.
6. Remove two switch screws, then the switch.
7. Reverse procedure to install.
8. On models equipped with radio coded theft protection system, refer to Vehicle Damage Warnings for system disarming and arming procedures. On models equipped with airbag system, refer to Technician Safety Information for system disarming and arming procedures.