Fuel Tank: Service and Repair

WARNING: Do not smoke while working on the fuel system. Keep open flame away from your work area.

1. Block front wheels. Jack up the rear of the car and support with jackstands.
2. Remove the drain bolt and drain the fuel into an approved container.
3. Remove both maintenance access covers in the luggage area.
4. Disconnect all hoses and electrical connectors.

Fuel Tank Location:

CAUTION: When disconnecting the hoses, slide back the clamps, then twist hoses as you pull to avoid damaging them. Clean the flared joint of the high pressure hoses thoroughly before reconnecting them.

5. Place a jack or other support device under the tank.
6. Remove the strap nuts and let the straps fall free.
7. Remove the fuel tank.

NOTE: The tank may stick on the undercoat applied to its mount. To remove, carefully pry it off the mount.

9. Install a new washer on the drain bolt, then install the parts in the reverse order of removal.