Procedure 4

Programming the Transmitter

This transmitter is not programmable.

Ordering the Transmitter

Transmitters can be ordered directly from Kenwood USA by authorized Honda Dealers only. Send a completed order form,* (copy it from the Accessory Replacement Parts section of the Dealer Parts Price List) along with a dealer check for $30.00 (payable to Kenwood U.S.A. Corp.), to this address:

Kenwood Service Corp.
P.O. Box 22745
Long Beach, CA 90801-5745

If you need a transmitter shipped overnight, fill out the order form, then call Kenwood at (800)852-4690, or Fax them at (310) 898-1029 (weekdays, from 8:30 A.M. thru 4:00 PM., PST). You will need to give the information on the order form to the Kenwood representative. The transmitter will be sent to your Dealership C.O.D. Additional shipping and handling charges will be applied to the order.

Batteries for the Transmitter

The battery number is CR1220. Each transmitter uses two batteries.

*On the order form, you must include the serial number of the keyless control unit or the number from one of the original transmitters.