Tools - Crankshaft Pulley Holder

Bulletin No.
92-040

Issue Date
NOV 13, 1992

Model
ALL

Applicable To
1990-93

File Under
SPECIAL TOOLS

Crankshaft Pulley Holder





The tools in this chart are used to remove and install the crankshaft pulleys on the cars listed. For models after 1993, refer to the appropriate Service Manual.

NOTES:
^ Before using any crankshaft pulley holder tools, be sure the Holder Attachment is completely engaged in the Holder Handle, and the thumb screw is tightened.
^ Before using the Pin Type Holder Attachment, apply molybdenum disulfide grease to the inside diameter of the tool and the outside diameter of the socket.
^ Do not use air impact tools with the 17 mm and 19 mm sockets; you may damage the sockets.