Final Adjustments After Repair and Warranty Claim Info
FINAL ADJUSTMENTS AFTER REPAIRIf some water leaks persist after performing all the necessary repairs, perform the final adjustments for the following areas:
A slight leak at the top of door glass, at the run channel -
1. Increase the glass height 0.5 - 1.0 mm (see step 11).
2. Increase the quarter glass window camber 0.5 - 1.0 mm (see step 38).
A slight leak from the A pillar weatherstrip and roof side seal area -
1. Readjust the roof side seal for flush fit to the A pillar weatherstrip (see step 16).
2. Readjust the roof side seal to increase seal tension on the A pillar weatherstrip (see step 34).
WARRANTY CLAIM INFORMATION
In warranty:
The normal warranty applies.
Out of warranty:
Any repair performed after warranty expiration may be eligible for goodwill consideration by the District Service Manager. You must request consideration, and get the DSM's decision, before starting work.
Failed part:
P/N 72320-SR2-003
H/C 4016838
Defect code:
059
Contention code:
B06