Rear Suspension Strut

Fig. 2 Strut Upper Attaching Nuts:

Fig. 3 Strut Lower Mounting Bolt:

Fig. 4 Strut To Rear Suspension Knuckle Position:

1. On two door models, open hatchback for access to upper strut mounting.
2. On four door models, open trunk for access to upper strut mounting.
3. On all models, raise and support rear of vehicle, then remove wheel and tire assembly.
4. Support suspension using a suitable jack.
5. Remove strut upper support nuts, then push downward on strut, Fig. 2 .
6. Remove strut lower mounting bolt, Fig. 3 .
7. Separate strut from rear suspension knuckle, by compressing strut. If strut is difficult to remove, open slit on knuckle just enough to allow strut removal.
8. Reverse procedure to install. When installing strut, align projection on strut with slit on rear suspension knuckle, Fig. 4 .