Manual Transaxle
ACCELERATOR CONTROL CABLE REPLACEMENTREMOVE OR DISCONNECT
1. Accelerator control cable from accelerator pedal.
^ Push accelerator control cable through bulkhead grommet
2. One nut, one bolt, [1][2]PCV hose and air cleaner from throttle body.
3. Accelerator control cable from throttle lever by loosening cable locknut and adjusting nut.
Throttle Valve Cable And Accelerator Control Cable:
4. Accelerator control cable from vehicle.
INSTALL OR CONNECT
1. Accelerator control cable to throttle lever; secure with cable locknut and adjusting nut (do not tighten fully).
^ Push accelerator control cable through bulkhead grommet.
2. Accelerator control cable to accelerator pedal.
^ Adjust accelerator control cable. Refer to Accelerator Control Cable Adjustment under Adjustments. Adjustments
3. [1][2]PCV hose to air cleaner assembly and air cleaner to throttle body; secure with one nut and one bolt. Tighten air cleaner assembly nut and bolt to 15 Nm (11 lb ft).