Tank Pressure Control Solenoid Vacuum Valve Replacement

TANK PRESSURE CONTROL SOLENOID VACUUM (TPC SV) VALVE REPLACEMENT

REMOVE OR DISCONNECT
1. Negative (-) battery cable.
2. TPC SV valve electrical connector.
3. Two vacuum hoses from TPC SV valve.
4. One screw and TPC SV valve from bulkhead.

INSTALL OR CONNECT
1. TPC SV valve to bulkhead; secure with one screw.
2. Two vacuum hoses to TPC SV valve.
3. TPC SV valve electrical connector.
4. Negative (-) battery cable. Tighten Negative (-) battery cable-to-negative (-) battery terminal retainer to 15 Nm (11 lb ft).