Evaporative Emission Control Canister: Service and Repair

EVAPORATIVE EMISSION (EVAP) CANISTER REPLACEMENT

REMOVE OR DISCONNECT
1. Negative (-) battery cable.
2. Three vacuum hoses from Evaporative Emission (EVAP) canister.
3. EVAP canister and bracket from bulkhead.

INSTALL OR CONNECT
1. EVAP canister and bracket to bulkhead.
2. Three vacuum hoses to EVAP canister.
3. Negative (-) battery cable. Tighten Negative (-) battery cable-to-negative (-) battery terminal retainer to 15 Nm (11 lb. ft.).