Speedometer Gauge - Revised Replacement
File In Section: 8 - Chassis/Body ElectricalBulletin No.: 83-83-08A
Date: October, 1998
SERVICE MANUAL UPDATE
Subject:
Section 8C - Revised Speedometer Gauge Replacement Procedure
Models:
1995-98 Geo Metro
1999 Chevrolet Metro
This bulletin is being revised to add the 1998-99 model years and updated repair procedures. Please discard Corporate Bulletin Number 83-83-08 (Section 8 - Chassis/Body Electrical)
This bulletin is being issued to revise the speedometer gauge replacement procedure in Section 8C of the Service Manual. When replacing the speedometer gauge (P/N's 91173309 & 91173310), the carton will contain a speedometer gauge, red wire and a 3 mm x 10 mm screw. It is important to install the red wire as shown in the attached illustration.
Also, disconnect BLK/BLU wire from 16P connector of instrument cluster and tape over the disconnected terminal, using a winding motion to insulate it completely.