Horn Switch: Service and Repair

1. On 1991-92 models, deactivate airbag as described under MAINTENANCE PROCEDURES/AIRBAG DEACTIVATION.
2. Remove air bag inflator module as described in PASSIVE RESTRAINTS, AIR BAG/MAINTENANCE PROCEDURES/INFLATOR MODULE.
3. On 1989-90 models, pull steering wheel pad from steering wheel.
4. Disconnect ground wire from steering wheel pad, then remove pad.
5. On all models, remove steering wheel nut, then place alignment marks on steering shaft and wheel for use during installation.
6. Using a suitable puller, remove steering wheel.
7. Reverse procedure to install. When installing steering wheel, align marks made during removal. Torque steering wheel nut to 24 ft. lbs.
8. On 1991-92 models, reactivate airbag as described under MAINTENANCE PROCEDURES/AIRBAG ACTIVATION.