Drive Belt Tensioner: Service and Repair

Drive Belt Tensioner Replacement - Accessory

Removal Procedure




1. Remove the accessory drive belt. Refer to Drive Belt Replacement - Accessory Drive Belt Replacement - Accessory.
2. Remove the drive belt tensioner bolts.
3. Remove the drive belt tensioner.

Installation Procedure




1. Position the drive belt tensioner to the water pump.

Caution: Refer to Fastener Caution Fastener Caution.

2. Install and tighten the drive belt tensioner bolts.

Tighten the bolts to 50 Nm (37 lb ft).

3. Install the accessory drive belt. Refer to Drive Belt Replacement - Accessory Drive Belt Replacement - Accessory.