| Standard Hours | Manufacturer Warranty Hours | Skill Level | Notes |
| Replace |
| Front Axle |
| 4WD |
| Corporation Axle | 3.9 | 0.0 | A | |
| Dana Axle | 5.5 | 0.0 | A | |
| Note |
| To Replace Pinion & Side Gears, Shaft and Washers, Add | 0.5 | 0.0 | A | |
| To Replace Ring & Pinion, Add |
| Corporation Axle | 1.7 | 0.0 | A | |
| Dana Axle | 2.2 | 0.0 | A | |
| To Replace Pinion Bearings, Add |
| Corporation Axle | 1.3 | 0.0 | A | |
| Dana Axle | 1.5 | 0.0 | A | |
| To Replace Diff Case Side Bearings, Add |
| One Side | 0.2 | 0.0 | A | |
| Both Sides | 0.4 | 0.0 | A | |
| To Replace Axle Shaft and/or U-Joint, Add | 0.7 | 0.0 | A | |
| To Replace Axle Shaft Guide, Add |
| One | 0.4 | 0.0 | A | |
| To Replace Axle Shaft Oil Seal, Add |
| One | 0.4 | 0.0 | A | |
| Rear Axle |
| 8.50 |
| Without Limited Slip | 2.7 | 0.0 | B | |
| With Limited Slip | 3.4 | 0.0 | B | |
| 9.50 |
| Without Limited Slip | 2.7 | 0.0 | B | |
| With Limited Slip | 3.4 | 0.0 | B | |
| 10.50 |
| Without Limited Slip | 3.1 | 0.0 | | |
| With Limited Slip | 3.4 | 0.0 | | |