Rear Washer Nozzle - Description

REAR





The outer surface of the rear washer nozzle retainer is visible on the rearward-facing surface of the rear wiper arm near the wiper blade end of the arm. The rear washer nozzle is constructed of molded plastic. The rear washer nozzle body (3) is secured by an integral retainer (2) with two integral latch features and a live hinge to the rear wiper arm.

The two orifices (4) of the nozzle are oriented downward and towards the rear door glass, and their aim can be adjusted by inserting a pin into the orifice and rotating it to the desired location. The washer plumbing fitting (1) is oriented towards the pivot end of the rear wiper arm and is concealed between the rear wiper arm and the rear door glass.

The rear washer nozzle cannot be adjusted or repaired and, if ineffective or damaged, it must be replaced.