Rear A/C Pressure Transducer - Removal

REMOVAL

WARNING: Review safety precautions and warnings before performing this procedure and . Failure to follow these instructions may result in serious or fatal injury.





1. Disconnect and isolate the negative battery cable.
2. Recover the refrigerant from the rear refrigerant system .
3. Remove the rear condenser cover from the top of the vehicle.
4. Disconnect the wire harness connector (1) from the rear A/C pressure transducer (2) located on the rear A/C liquid line (3) at the left end of the A/C receiver drier (4)
5. Remove the rear A/C pressure transducer from the rear A/C liquid line and remove and discard the O-ring seal.