Positive Crankcase Ventilation (PCV) Valve - Installation

3.0L










NOTE: Inspect the oil drain back access hole in the cylinder head cover to assure that it is free of obstruction.

1. Lubricate the Positive Crankcase Ventilation (PCV) o-rings with clean engine oil.
2. Carefully position and push down on the PCV to seat.
3. Install the PCV retaining fasteners. Tighten fasteners to 10.8 Nm (96 in. lbs.).

4. Install vent hose.
5. Install air cleaner assembly.
6. Connect the negative battery.
7. Install engine trim cover.