Rear A/C Condenser Fan - Removal

REMOVAL





1. Disconnect and isolate the negative battery cable.
2. Remove the screws that secure the rear condenser cover to the top of the vehicle and remove the cover.
3. Disconnect the two wire harness connectors (1) located on the left side rear condenser mounting bracket (2).





4. Remove the six nuts and washers (2 and 6) that secure the rear condenser fan unit (1) to the two rear condenser mounting brackets (4 and 7) and to the two condenser fan brackets (3 and 5).
5. Remove the rear condenser fan unit. If required, remove the two condenser fan brackets.