Right

REMOVAL





1. Disconnect the negative battery cable.
2. Remove the engine cover.
3. Remove the front engine cover bracket.
4. Separate the transmission level indicator tube from bracket and remove the rear engine cover bracket.
5. Install clevis bracket to engine lift brackets.
6. Install engine lifting chain through clevis brackets.
7. Raise and support the vehicle.
8. Remove the skid plate.
9. Drain engine oil.
10. Loosen both engine mount through bolts.
11. Lower the vehicle.
12. Remove the oil level indicator tube.

NOTE: Care must be taken not to crush the turbocharger against the windshield cowl when raising and supporting the engine.

13. Connect an engine lift and support the engine.
14. Remove the engine mount retaining bolts.
15. Remove the engine mount.