Left

REMOVAL





1. Disconnect the negative battery cable.
2. Remove the engine cover.
3. Remove the engine cover brackets and transmission tube retainer.
4. Remove the battery and battery tray.
5. Remove power distribution center (PDC) from bracket and set aside.
6. Remove PDC bracket.
7. Reposition the engine wiring harness.
8. Raise and support the vehicle.
9. Loosen both right and left engine mount through bolts.
10. Lower the vehicle.
11. Install clevis brackets through engine lifting fixtures.
12. Install engine lifting chain to clevis brackets.
13. Install engine lift and hoist engine.
14. Remove the left engine mount retaining bolts
15. Remove the engine mount.