Rear

REAR





CAUTION: Do not allow the wiper arm to spring back against the glass without the wiper blade in place or the glass may be damaged.

1. Remove the rear wiper blade from the rear wiper arm. .
2. Lift the rear wiper arm (1) until the arm hinge is in the over center position.
3. From the back of the rear wiper arm, insert a small screwdriver into the slot between the rear washer nozzle body (3) and the two latch tabs (2) and gently pry the latch tabs far enough to disengage them from the nozzle.
4. Disconnect the rear washer supply hose (5) from the barbed nipple (4) on the rear washer nozzle.
5. Remove the nozzle from the wiper arm.