Front Right - Passenger Bench Seat

FRONT RIGHT - PASSENGER BENCH SEAT

WARNING: To avoid serious or fatal injury during and following any seat belt or child restraint anchor service, carefully inspect all seat belts, buckles, mounting hardware, retractors, tether straps, and anchors for proper installation, operation, or damage. Replace any belt that is cut, frayed, or torn. Straighten any belt that is twisted. Tighten any loose fasteners. Replace any belt that has a damaged or ineffective buckle or retractor. Replace any belt that has a bent or damaged latch plate or anchor plate. Replace any child restraint anchor or the unit to which the anchor is integral that has been bent or damaged. Never attempt to repair a seat belt or child restraint component. Always replace damaged or ineffective seat belt and child restraint components with the correct, new and unused replacement parts listed in the DaimlerChrysler Mopar(R) Parts Catalog.





1. Position the spacer and the front right seat belt buckle (1) to the center of the front passenger bench seat back frame. Be certain to route the wire harness for the center seat belt retractor (3) over the top of the spacer.
2. Install and tighten the screw (2) that secures the buckle lower anchor to the center of the seat back frame. Tighten the screw to 37 Nm (27 ft. lbs.).
3. Restore the passenger side seat cushion to its normal seating position.