Pressure Hose - Pump To Steering Gear Line

PRESSURE HOSE - PUMP TO STEERING GEAR LINE

1. Install the pressure hose to the vehicle.
2. Reconnect the pressure hose at the steering gear line. Tighten to 18 Nm (13 ft.lbs.).
3. Install the pressure hose routing brackets to the cradle.
4. Lower the vehicle.
5. Reconnect the pressure hose at the power steering pump. Tighten to 38 Nm (28 ft.lbs.).
6. Fill the power steering fluid
7. Reinstall the washer bottle mounting screws and reconnect the electrical connectors.