Removal

REMOVAL

WARNING: Review safety precautions and warnings in this group before performing this procedure and . Failure to follow the warnings and cautions may result in serious or fatal injury.





1. Disconnect and isolate the negative battery cable.
2. Recover the refrigerant from the refrigerant system .
3. Remove the grille .
4. Remove the A/C condenser fan assembly from the front of the A/C condenser .
5. Remove the bolt (3) that secures the A/C receiver/drier (1) to the right end of the A/C condenser (2).
6. Disengage the receiver/drier mounting bracket (4) from the A/C condenser.
7. Disconnect the A/C receiver/drier from the A/C condenser and remove and discard the O-ring seals.
8. If required, remove the receiver/drier mounting bracket from the A/C receiver/drier.
9. Install plugs in, or tape over the opened receiver/drier and condenser ports.