Rear Distribution Ducts - Removal

REMOVAL





1. Disconnect and isolate the negative battery cable.
2. Remove the air outlets (1) .
3. Remove the dome lamps (3).
4. Remove the screws (4 and 7) that secure the front, center and rear roof duct trim panels (2, 9 and 8) to the roof duct.
5. Remove the front roof duct trim panel by sliding it forward.
6. Remove the rear and center roof duct trim panels by sliding them rearward.
7. Disengage the retaining tabs that secure the air intake grille (5) into the rear evaporator trim panel (10) and remove the grille.
8. Remove the screws (6) that secure the rear evaporator trim panel to the roof duct.
9. Remove the rear evaporator trim panel by sliding it to the right of the vehicle.




10. Remove the screws (2) that secure the front roof duct (1) to the roof and remove the front duct.
11. Remove the screws (3) that secure the rear roof duct (4) to the roof and remove the rear duct.