Removal

REMOVAL





1. Disconnect negative battery cable.Battery
2. Remove the engine cover.Access Cover
3. Drain the coolant.Service and Repair
4. Remove the strut tower support (2).
5. Remove the intake air housing and tube.Service and Repair
6. Remove the charge air cooler tube (4).
7. Remove the resonator.
8. Remove the EGR tube.

CAUTION: Observe the position of the turbocharger oil passage housing and gasket. Failure to properly position the gasket during assembly will result in immediate turbocharger failure after assembly.

9. Remove the turbocharger (3).Turbocharger - Removal




10. Disconnect the engine harness and position aside.
11. Disconnect the swirl valve actuator connector.
12. Remove the swirl valve actuator (3) clips.
13. Remove the swirl valve actuator.