Right

RIGHT





1. Disconnect the negative battery cable.
2. Position the coolant reservoir aside.Coolant Recovery Container - Removal.
3. Remove the strut tower support.
4. Remove engine cover.
5. Remove engine cover front bracket.
6. Remove air cleaner cover and inlet tube to turbocharger.
7. Remove engine cover right rear bracket.




8. Remove the crankcase ventilation valve (CCV) and breather tube.
9. Disconnect the fuel return line.
10. Disconnect the fuel supply and return lines at the right cylinder head cover.
11. Disconnect the camshaft position sensor (CMP) and fuel injector wiring and position the right engine wiring harness aside.




12. Pull out on the fuel injector return fuel hose retainers, disconnect the hoses and position aside.
13. Remove the right fuel injectors.Removal
14. Remove the air conditioning (A/C) / heater hose bracket.
15. Remove the oil level indicator tube retaining bolt.




16. Remove the EGR air control valve assembly resonator.
17. Remove the vacuum pump (4).
18. Remove the cylinder head cover retaining bolts and remove cover.