Front - Dual Rear Wheel (DRW)

FRONT BRAKE ROTOR - DUAL REAR WHEEL (DRW)





1. Install the disc brake rotor to the hub.
2. Install the bolts (2) for the wheel flange ring (1). Tighten bolts (2) to 200 Nm (148 ft. lbs.).




3. Install the disc brake caliper adapter (5). Tighten to 170 Nm (125 ft. lbs.) .
4. Install the brake pads .
5. Install the caliper (4) .
6. Press and release the brake pedal several times until pressure has built up.
7. Check fluid in reservoir and correct if necessary.
8. Install the front wheels .
9. Lower the vehicle.