Rear

REAR





1. Install the brake caliper adapter to the axle mount. Tighten the bolts (4) to 80 Nm (59 ft. lbs.) plus an additional 40° turn.
2. Install the disc brake pads .

NOTE: Do not install the brake hose twisted and ensure freedom of movement.

3. Install the disc brake caliper (5). Tighten the guide pins (3) to 34 Nm (283 in. lbs.) for M8 bolt or 65 Nm (48 ft. lbs.) for M10 bolt.
4. Reconnect the pad sensor (7) to the cable.
5. Install the rear wheels .
6. Lower the vehicle.