Rear Brake Caliper - (Single Rear Wheels) (SRW)

REAR BRAKE CALIPER - (SINGLE REAR WHEELS) (SRW)





1. Unscrew the cap from the brake fluid reservoir.
2. Raise and support the vehicle.
3. Remove the rear wheels (1) .
4. Remove the wear indicator bolt (6) and the wear indicator (7).

NOTE: Seal off the line ends and connection threads in the brake calipers with plugs. Also check brake hoses for signs of cracks.

5. Remove the brake hose (2) at the brake caliper (5).
6. Remove the brake caliper guide bolts (3).
7. Remove the brake caliper (5).