Front AC

REMOVAL

WARNING: Review safety precautions and warnings in this group before performing this procedure and . Failure to follow the warnings and cautions may result in serious or fatal injury.





NOTE: Typical A/C compressor shown.

1. Disconnect and isolate the negative battery cable.
2. Recover the refrigerant from the refrigerant system .
3. Raise and support the vehicle.
4. Remove the accessory drive belt Serpentine Belt.
5. Disconnect the engine wire harness (5) from the A/C compressor (7).
6. Remove the bolts (3) that secure the A/C suction line (1) and the A/C discharge line (2) to the A/C compressor.
7. Disconnect the A/C suction and discharge lines from the A/C compressor and remove and discard the O-ring seals (4).
8. Support the A/C compressor and remove the three bolts (6) that secure the compressor to the engine and remove the compressor.
9. Install plugs in, or tape over the opened refrigerant line fittings and compressor ports.