Left

LEFT





1. Discard the old gasket and clean the cylinder head and manifold sealing surfaces.
2. Install a new exhaust manifold gasket.
3. Install the left exhaust manifold to cylinder head nuts. Torque the nuts to 25 Nm ( 222 in. lbs.)




4. Install the exhaust elbow to turbocharger bolts. Torque to 20 Nm (177 in. lbs.). and then add another 90° of rotation.
5. Install the turbocharger heat shield. Torque to 10 Nm ( 88 in. lbs.).
6. Install the engine cover.
7. Connect the negative battery cable.